Installation - Touch Up for Tesla Wheel

Usage Instructions

1. Ensure the pen cap is securely closed. Shake vigorously for 1 minute to mix the paint.
2. Remove the pen cap. Hold the pen tip upwards and press the tip lightly to release the internal air pressure.
3. Hold the pen tip downwards.Press it continuously on the pen cap for about 1 minute until the paint starts flowing.
4. Gently dab or stroke onto the scratch.For very smooth surfaces (like bumpers), dabbing is recommended.

If the cap is ditticult to take off, Hold the lower plastic part firmly and twist the upper cap back and forth a few times before pulling it off.

How to Replace the Pen Tip

1. Pull out the old tip
2. Insert the new tip with the small end facing inward

If the pen tip dries out (due to not capping properly) or wears out after multiple uses :

⚠️ WARNING

● If applied without completely removing dirt, the product may not work effectively. Ensure all dirt is thoroughly removed before use.
● Test the product on an inconspicuous area first before full application.
● Color differences may occur depending on weather conditions, environment, or application method during use.
●Contains organic solvents. Prolonged inhalation of solvent fumes is hazardous. Ensure adequate ventilation during use and drying.
●After use, securely close the cap and store in a cool place away from direct sunlight.
●Store out of reach of children to prevent tampering.
●If product accidentally enters eyes, rinse thoroughly with running water for at least 15 minutes and seek immediate medical attention.
● If swallowed, give large amounts of water to induce vomiting and seek immediate medical attention.
● Ensure the container is empty before disposal. ● Do not inhale or ingest.
○ Always refer to the enclosed manual before use. Class 2 Petroleum Products · No Open Flames · Hazard Class I · 6.5ml