Installation

1. Clean both the back and front surfaces of the door edge thoroughly.

2. Remove the product from its packaging and align it with the corresponding location indicated on the package.

3. Once you have confirmed the installation position, peel off the film from the double-sided tape on the back of the product. The adhesive side of the double-sided tape should be applied to the back side of the door.

4. Install the product by inserting it into the edge of the door, ensuring it fits perfectly to the shape of the door. Once it is properly fitted into place, press firmly on the adhesive surface of the double-sided tape with your fingers for about 10 seconds.

5. Repeat the same installation process for other locations.

*Please note that there are 4 dedicated parts for both Model 3 and Model Y, respectively. Parts with the prefix 3 or Y in the number are specific to each model. Please be careful not to make a mistake during installation.